17
"Time Shift" is a handy feature to "pause" live TV programs via a temporary recording
function, which you may find helpful if you are interrupted for a few minutes during your show.
It ensures that you don't miss a single second of the show because you can return to the TV
later and continue watching from where you stopped.
NOTE: To use this feature, a compatible data storage unit (like a flash
driv
e or hard disk drive
in FAT32 format) must be connected and running. If the storage space is running low,
recording may not work correctly.
NOTE: You may need to format the drive before using it. To do so, press the MENU button,
go to the USB menu > PVR Configure > Format, then press OK. (Formatting will erase ALL
data. Make sure you have made a backup of important data before formatting!)
WARNING: While Time Shift or other rec
ording functions are running, DO NOT disconnect
the data storage unit, to avoid damage or data loss.
● To start Time Shift, simply press the ▶II button and a temporary recording will start
immediately.
● To watch from where you started Time Shift, press the ▶II button. You can navigate
your Time Shift temporary recording, for example, to skip parts such as c
ommerc
ial
breaks with the ▶▶ button, or rewind with the ◀◀ button.
● To exit Time Shift completely and go back to the live TV broadcast, press the
button.
STOP
( )
To Next Page
Loading...