Teac WX-7000 Quick Start Guide

18
7. Playback
7-1.
Order of procedures
Set the playback conditions
c
Select the playback file
c
Start playback
o If you want to search for a playback position, first press the PAUSE
button to make the system playback ready and then search.
7-2.
Setting playback conditions
Make output unit settings.
SYSTEM menu w OUTPUT SETTING
7-3.
Selecting the playback file
Select the media and file.
FILE menu w FILE OPEN
7-4.
Searching with the counter
When ready for playback, select the counter (COUNT), and use the
VALUE knob to search for the desired counter position. Then, press
the VALUE knob to start playback from that counter position.
7-5.
Searching by event
When ready for playback, select the event number (EVENT), and use
the VALUE knob to search by event number. Then, press the VALUE
knob to start playback from the position of that event number.
7-6.
Searching by ID
When ready for playback, select the ID number, and use the VALUE
knob to search for the desired ID number. Then, press the VALUE
knob to start playback from the position of that ID number.

Teac WX-7000 Specifications

General

Brand	Teac
Model	WX-7000
Category	Voice Recorder
Language	English