Adjusting throttle ratchet strength
The radio comes with a smooth throttle from the factory. Adjusting how easy it moves can be adjusted by
using a screwdriver and turning the left screw on the metal bracket, as shown in the following photo.
Counter-clockwise to decrease the tension and clockwise to increase the tension.
If you rather prefer a ratchet/clicking stick, loosen the left screw entirely and increase the tension of the
right screw.
Adjusting stick tension
If the sticks feel too rigid or too soft, the tension of the springs can be changed by adjusting the tensions
screws. The locations are shown in the following photos.
Turn clockwise to increase the tension (more rigid), counter-clockwise to decrease the tension (softer).
To Next Page
Loading...
