TEC MA-1350-1 Series Programming Manual

- 46 -
EO3-11084
MA-1350-1 SERIES
Address : 2 2
(Optional Functions 8)
0
▼
Your Selection
▼
Supplementary Description for Address 22:
Bits 2 & 3: Selection of the % I and % II keys use. If SET status is selected to Bit 2, both % I and
% II will be used as [% -]. If SET status is selected to Bit 3, both % I and % II will be used
as [% +]. Be certain to change the Financial Total Names corresponding to each % key
if changed as shown above.
Bit 6: If SET status is selected, Sales Total Amount will be printed on the last line of the receipt. No-
sale, Received-on-Account, Paid Out and Previous Balance transactions are excluded.
Bits 7 & 8: If both RESET, General Type Feature can be obtained.
Initial SET Bit Nos.
1 Negative Mode ( - ) Operations
2 [% I] Key Use
3 [% II] Key Use
4 Customer‘s Display Method
5 [RECEIPT ISSUE] key Function
6 Sales Total Amount Print on Receipt
7 FOOD STAMP (Illinois)
8 FOOD STAMP (New Jersey)
Content
Bit
No.
Selective Status
RESET
SET
USED AS [% -]
KEY
PROHIBITED
ALLOWED
USED AS [% +]
KEY
PUT-AWAY TYPE
(Holding Display)
USED AS [% +]
KEY
USED AS [% -]
KEY
ORDINARY TYPE
(Incemental Display)
PRINT
Regardless of the R
OFF lamp status
Effective only when
the R OFF lamp is
illuminated.
NON-PRINT
New Jersey TYPE
Illinois TYPE
GENERAL TYPE, or
follow bit 8 status.
GENERAL TYPE, or
follow bit 7 status.

TEC MA-1350-1 Series Specifications

General

Brand	TEC
Model	MA-1350-1 Series
Category	Cash Register
Language	English