Need help?Do you have a question about the tecan NanoQuant Plate and is the answer not in the manual?
General| Brand | tecan |
|---|---|
| Model | NanoQuant Plate |
| Category | Laboratory Equipment |
| Language | English |
Overview of the NanoQuant Plate's purpose and capabilities as a laboratory measurement tool.
Lists the items included in the NanoQuant Plate package for Infinite reader series.
Specifies minimum and recommended computer hardware for the i-control software.
Details the necessary hardware and software components for performing NanoQuant measurements.
Describes the primary applications of the NanoQuant Plate for nucleic acid quantification and labeling efficiency.
Step-by-step guide for installing the Tecan i-control software.
Instructions on how to execute a measurement using the i-control software and the NanoQuant Plate.
Explains how to perform and interpret quality control checks during the blanking procedure.
Details functions in the i-control file menu and lists available sample types.
Lists physical parameters, wavelength settings, and measurement times for the NanoQuant Plate.
Provides procedures for cleaning the NanoQuant Plate using an ultrasonic bath or Kimwipe.
Describes methods for applying samples using multi-channel or single pipettes.
Outlines the procedure for disinfecting the NanoQuant Plate with 70% ethanol.
Explains how nucleic acid concentration is calculated using the Lambert-Beer law and reference values.
Details the procedures and calculations for average and individual blanking.
Explains calculations based on average blanking for different instrument types.
To Next Page
