Need help?Do you have a question about the tecan infinite 200 and is the answer not in the manual?
General| Detection Modes | Absorbance, Fluorescence, Luminescence, Time-Resolved Fluorescence (TRF), Fluorescence Polarization (FP) |
|---|---|
| Wavelength Range | 230 - 1000 nm |
| Plate Formats | 6- to 384-well plates |
| Light Source | Xenon flash lamp |
| Fluorescence Excitation | 230 - 850 nm |
| Fluorescence Emission | 280 - 850 nm |
| Automation Compatibility | Yes, compatible with robotic systems |
| Software | i-control, Magellan |
| Shaking | Linear, orbital |
Core safety guidelines for instrument operation. Follow basic precautions to reduce risk of injury or electrical shock.
Introduces the various assay measurement modes supported by the instrument.
Describes the optional injector module and its functions for liquid dispensing.
Information on the control software (i-Control) for instrument operation.
Steps for receiving and checking the instrument upon arrival.
Crucial procedure to prepare the instrument for operation by removing locks.
Step-by-step guide to powering on the instrument after installation.
Strategies for tuning parameters to improve fluorescence measurement results.
Detailed guide for performing Fluorescence Polarization assays.
Strategies for tuning parameters to improve absorbance measurement results.
Comprehensive technical data and performance metrics of the instrument.
Procedures for regular instrument performance checks.
Defines the benchmarks for instrument performance verification.
Lists and describes common error messages and their potential solutions.
To Next Page
