9. Cleaning and Maintenance
148 Instructions for Use for infiniteĀ® 200 No. 30017581 Rev. No. 1.4 2008-07
9.2 Liquid Spills
1. Switch OFF the instrument.
2. Wipe up the spill immediately with absorbent material.
3. Dispose of contaminated material appropriately.
4. Clean the instrument surfaces with a mild detergent.
5. For biohazardous spills clean with B30 (Orochemie, Max-Planck-Str. 27,
D-70806 Kornwestheim).
6. Wipe cleaned areas dry.
WARNING
ALWAYS SWITCH-OFF THE INSTRUMENT BEFORE REMOVING ANY
KIND OF SPILLS ON THE INSTRUMENT. ALL SPILLS MUST BE
TREATED AS POTENTIALLY INFECTIOUS. THEREFORE, ALWAYS
ADHERE TO APPLICABLE SAFETY PRECAUTIONS, (INCLUDING THE
WEARING OF POWDER-FREE GLOVES, SAFETY GLASSES AND
PROTECTIVE CLOTHING) TO AVOID POTENTIAL INFECTIOUS DISEASE
CONTAMINATION.
ADDITIONALLY, ALL RESULTING WASTE FROM THE CLEAN-UP MUST
BE TREATED AS POTENTIALLY INFECTIOUS AND THE DISPOSAL
MUST BE PERFORMED ACCORDING TO THE INFORMATION GIVEN IN
CHAPTER 9.5 DISPOSAL.
IF THE SPILL OCCURS IN THE INSTRUMENT,
A SERVICE TECHNICIAN IS REQUIRED.
WARNING
ENSURE THAT THE MICROPLATE IS REMOVED FROM THE
INSTRUMENT BEFORE IT IS PREPARED FOR SHIPMENT.IF A
MICROPLATE IS LEFT IN THE INSTRUMENT, FLUORESCENT
SOLUTIONS MAY SPILL ONTO THE OPTICAL PARTS AND DAMAGE THE
INSTRUMENT.
To Next Page
Loading...
