tecan infinite 200 - 7. Instrument Features

7. Instrument Features
2008-07 Instructions for Use for infinite® 200 No. 30017581 Rev. No. 1.4 115
7. Instrument Features
7.1 Introduction
Note
All specifications are subject to change without prior notification.
The following types of measurement are provided with the fully equipped
infinite
®
200 microplate reader:
Measurement Type Description
Fluorescence Intensity Top/Bottom See 7.3 Fluorescence Intensity and
Time Resolved Fluorescence (TRF)
Fluorescence Time Resolved See 7.3 Fluorescence Intensity and
Time Resolved Fluorescence (TRF)
Fluorescence Polarization
See 7.4 Fluorescence Polarization (FP- in
finite
®
F200 only)
Absorbance See 7.5 Absorbance
Glow Type Luminescence See 7.6 Glow Type Luminescence
Dual Color Luminescence See 7.8 Dual Color Luminescence (e.g. BRET
TM
)
Flash Type Luminescence See 7.7 Flash Type Luminescence
• All standard microplates from 6 to 384-wells that conform to the following
standards, can be measured in any of the above measurement types:
ANSI/SBS 1-2004; ANSI/SBS 2-2004; ANSI/SBS 3-2004 and ANSI/SBS
4-2004.
• The instrument can perform kinetic measurements.
• Reading may be restricted to one part of the microplate.