9. Cleaning and Maintenance
154 Instructions for Use for infinite® 200 No. 30017581 Rev. No. 1.4 2008-07
9.5.3 Disposal of the Instrument
Please contact your local Tecan service representative before disposing of the
instrument.
STOP
Caution
Always disinfect the instrument before disposal.
Pollution degree
2 (IEC/EN 61
010-1)
Method of disposal
Contaminated waste
WARNING
DEPENDING ON THE APPLICATIONS, PARTS OF THE HYDROFLEX
PLATFORM MAY HAVE BEEN IN CONTACT WITH BIOHAZARDOUS
MATERIAL.
• MAKE SURE TO TREAT THIS MATERIAL ACCORDING TO THE
APPLICABLE SAFETY STANDARDS AND REGULATIONS.
• ALWAYS DECONTAMINATE ALL PARTS BEFORE DISPOSAL
(I.E. CLEAN AND DISINFECT).
To Next Page
Loading...
