tecan infinite 200 - Inserting the Cuvette

5. Optical System
2008-07 Instructions for Use for infinite® 200 No. 30017581 Rev. No. 1.4 81
5.5.4 Inserting the Cuvette
The cuvette holder is attached securely to the cuvette carrier and moves the
cuvette in and out. The cuvette carrier is an integral part of the instrument and
cannot be removed.
Figure 5-8: Cuvette Port infinite
®
M200
The cuvette has to be inserted so that the measurement window of the cuvette
corresponds to the measurement window of the cuvette holder:
Figure 5-9: How to insert the cuvette into the cuvette holder
Measureme
nt Window
Direction of Light