3. Installation
2008-07 Instructions for Use for infinite® 200 No. 30017581 Rev. No. 1.4 47
3. Installation
3.1 Unpacking and Inspection
The delivered packaging includes the following items:
• CABLE USB 2.0 A/B 1.8 M Black with housing receptacle ferrite
• CDROM
infinite
®
F200/infinite
®
M200
• OOB Quality Report
• Transport lock (mounted)
• Instructions for Use
• Final test protocol
The
infinite
®
F200 packaging includes additionally the following items:
• Accessory Box
• Filter stop rings (8)
• Filter assembly tool
• Plastic tweezers
• Filter slide
The injector module packaging for 1 injector includes the following items:
• Bottle holder
• Beaker for priming
• 125 ml bottle brown
• Injector dummy (mounted)
• Waste tub
• 15 ml bottle
The second injector comes with the following items:
• Bottle holder
• Beaker for priming
• 125 ml bottle brown
• Waste tub
• 15 ml bottle
STOP
Caution
The reader has been tested with the supplied USB cable. If another USB
cable is used, Tecan Austria cannot guarantee the correct performance
of the instrument.
To Next Page
