tecan infinite 200 - Performance; User Friendliness

2. General Description
2008-07 Instructions for Use for infinite® 200 No. 30017581 Rev. No. 1.4 13
2.1.3 Performance
The infinite
®
200 has been designed to meet the requirements of a general-
purpose laboratory instrument.
The
infinite
®
200 provides a range of parameters for optimizing the measurement
results according to: the assay type (cell-based or homogeneous), the microplate
type, and the dispensed volumes per well and dispensing speeds.
2.1.4 User Friendliness
The infinite
®
M200 offers unparalleled flexibility in wavelength selection for
fluorescence intensity and absorbance measurements. Via software any
wavelength can be easily adjusted within the specified wavelength range. In
addition to single wavelength measurements, absorbance and fluorescence
spectra can be recorded. When running a spectrum there is no restriction due to
cut-off filters.
The
infinite
®
F200 offers high flexibility for the customization of fluorescence and
absorbance measurements; slides containing fluorescence and absorbance
interference filters are easily accessible to the user.
Note
If the instructions given in this document are not correctly performed,
the instrument will either be damaged or the procedures will not be
performed correctly and the safety of the instrument is not guaranteed.