Tech4o Traileader - Change Altimeter Graph Display; Switch Between Meters and Feet; Lock the Altimeter

25
Access the Altimeter Display (See section 7.1
for how to access the Altimeter display)
• Hold M for 3 seconds to enter Altimeter set
menu
• Press LAP/RST(DOwn) to scroll to Vw. Log
• Press M to select Vw. Log
* Press ST/STP(+) or LAP/RST( - )
to view the maximum and minimum
altitudes and when the measurement
occurred
* Press M to view a graphical history of
the previous 48 hours
* Press ST/STP(+) or LAP/RST( - )
to scroll through time/altitude records
with corresponding graphical display
* Press ESC to exit the graphical history
• Press ESC to exit Vw. Log
• Press ESC to exit Altimeter set menu
7.9 CHAnGE THE ALTIMETER GRAPH
DISPLAy
To Access the Altimeter Display (See section
7.1 for how to access the Altimeter display)
• Hold M for 3 seconds to enter Altimeter set
menu
• Press LAP/RST(DOwn) to scroll to Chart
• Press M to select Chart
* Press ST/STP to toggle between Daily
and History
* Select Daily to view the altitude history
graph on a 24 hour basis OR
* Select History to view the altitude
history graph on a rolling 48 hr. basis
* Press ESC to confirm and exit Chart
• Press ESC to exit Altimeter set menu.
ALTIMETER uSE
7.10 SwITCH BETwEEn METERS AnD FEET
Access the Altimeter Display (See section 7.1
for how to access the Altimeter display)
• Press LAP/RST to change the units between
ft /m
7.11 LOCK THE ALTIMETER
The altimeter lock feature is useful when
you have set a reference altitude that
you do not want to change due to
changing weather patterns, such as,
at base camp before a hike the next ¬
alTImETER