Technaxx TE20 User Manual

Low power
output
Battery
condition may
be poor
Recharge or replace a battery
Fault
connection
Make sure the battery and Inverter
terminal are clean
Inverter does
not work after
connecting the
cables in
reverse
The internal
protection has
disabled the
inverter
Contact vendor company for help
Warnings & Caution
⚫ Use of the device in life support applications where failure of the device can reasonably
be expected to cause the failure of the life support equipment or to significantly affect its
safety or effectiveness is not recommended. ⚫ Do not use the device in the presence of a
flammable anesthetic mixture with air, oxygen or nitrous oxide, and also not near flammable
materials, fumes or gases. ⚫ Since the device requires adequate ventilation during
operation, do not block fan or cooling vents and do not cover the device. Do not operate
near car heating vents or in direct sunlight. ⚫ Keep the device dry at all times and
disconnect when not in use. ⚫ Turn OFF connected equipment before (!) starting your
engine. DO NOT plug a surge protector, line conditioner or UPS system into the device. If
you attach AC extension cords, use the heaviest practical gauge. ⚫ Before connecting a
battery charger or adapter, check its manual to make sure that the technical specifications
of the device (including output waveform) fall within the recommendations of the external
battery charger or adapter.
Hints for Environment Protection: Packages materials are raw
materials and can be recycled. Do not disposal old devices or
batteries into the domestic waste. Cleaning: Protect the device from
contamination and pollution (use a clean drapery). Avoid using rough,
coarse-grained materials or solvents/aggressive cleaner. Wipe the
cleaned device accurately. Distributor: Technaxx Deutschland
GmbH & Co.KG, Kruppstr. 105, 60388 Frankfurt a.M., Germany

Technaxx TE20 Specifications

General

Purpose	Universal
Output power	2000 W
Input voltage	12 V
Output voltage	230 V
Input frequency	- Hz
Power plug type	Type F (CEE 7/4)
Output frequency	50 Hz
Country of origin	Germany
Power supply type	Auto
Suitable location	Car
Power current type	DC-to-AC
USB ports quantity	2
Power protection features	Over current, Overheating, Overload, Short circuit
Built-in fan	Yes
Cooling type	Active
Display type	LCD
Product color	Black
LED indicators	Power, Status
Package type	Box
Cables included	DC
Quantity per pack	1 pc(s)
USB connector type	USB Type-A, USB Type-C
Waveform	Sine

Weight and Dimensions

Depth	360 mm
Width	260 mm
Height	119 mm
Weight	4200 g
Cable length	0.6 m