Technaxx TE20 User Manual

Normal use
The power inverter is intended to convert 12 V direct current voltage to
⚫ alternating current voltage 230 V/50 Hz and/or
⚫ direct current voltage of 12 V/max. 3000 mA (USB-A QC3.0)
⚫ direct current voltage of 12 V/max. 3000mA (USB-C)
→The power inverter is only intended for permanent installation.
→This device is not intended for use by children or persons with limited mental
capacity or lacking experience and/or lacking expertise. Children should be
supervised to ensure they do not play with the device.
→This device is not intended for commercial use.
→Any other use or modification of the device is considered improper and
involves significant risks. The manufacturer assumes no liability for damages
due to improper use.
Intended sites
The power inverter is intended for installation in
⚫ Automobiles (and lorries)
⚫ Caravans
⚫ Boats
with 12V batteries.
Do not place the power inverter:
⚫ near heat sources (radiators, direct sunlight), flammable materials, battery
compartment or starter battery,
⚫ moist locations or locations exposed to dripping or splashing water,
⚫ in environments with explosion hazards

Technaxx TE20 Specifications

General

Purpose	Universal
Output power	2000 W
Input voltage	12 V
Output voltage	230 V
Input frequency	- Hz
Power plug type	Type F (CEE 7/4)
Output frequency	50 Hz
Country of origin	Germany
Power supply type	Auto
Suitable location	Car
Power current type	DC-to-AC
USB ports quantity	2
Power protection features	Over current, Overheating, Overload, Short circuit
Built-in fan	Yes
Cooling type	Active
Display type	LCD
Product color	Black
LED indicators	Power, Status
Package type	Box
Cables included	DC
Quantity per pack	1 pc(s)
USB connector type	USB Type-A, USB Type-C
Waveform	Sine

Weight and Dimensions

Depth	360 mm
Width	260 mm
Height	119 mm
Weight	4200 g
Cable length	0.6 m