22
Adding by DDNS: Enter your DDNS domain or the static IP of the router. You
maybe need to set a port forwarding for the IP of the TX-128 in your WiFi
router. There for check the manual of your router. Fill in the device name,
username and password for the camera.
The password can be customized by you on the monitor. The standard
username is admin and password is to leave empty. Click on complete to
save the settings.
Note: Using DDNS function you need to:
→ Register to a third party provider (e.g. DynDNS, No-IP, etc.) that provides
you a DDNS domain OR → your router has a static IP from your internet
provider.
To Next Page
Loading...
Need help?
General
