21
6.4 IP/DDNS adding
By clicking on networked devices (1) the ADD by device ID will open. Here you
can click on other adding way (2). Now it is possible to add the TX-128 by IP
or DDNS (3).
Note: Adding the device by IP it is not possible to access the TX-128 from
outside your local network (no connection via mobile network 3G/4G/LTE).
Adding by local device IP: You can find the IP address in the router menu or
in the Security Premium PC Software. Fill in port (standard is 80) a device
name, username and password for the camera. The password can be
customized by you on the monitor. The standard username is admin and
password is to leave empty. Click on complete to save the settings.
Note: Adding the device by DDNS it is possible to access the TX-128 from
outside your local network (via mobile network 3G/4G/LTE).
To Next Page
Loading...
Need help?
General
