Click it to zoom in and out on the timeline
Device Setup
Clicking on Setup or Setting under the live view. It opens the Device setup
below.
This interface can differ a little bit depending on the use of iOS or Android. All
options are explained below.
The ID number of the device. This item cannot be filled in.
Device ID will be automatically configured according to
device type.
Find help how to use the App and also a small FAQ.
Click to change the WIFI Router the camera is connected
to.
Enable/Disable the microphone to listen to audio
configuration (is not usable to configure the camera).
- Enable/Disable the prompt tone of the device.
- Change the language according to user’s needs. Voice
Prompt is mainly used for WiFi configuration of the device
and status information for the user.
- Device recording: volume of the recorded video files
- Device output sound: volume the device speaker
playback the sound
To Next Page
Loading...
