24Technetix Group LimitedRev.1._0.1_0217
2. Once the amplifier upstream/return path is commissioned, software values can be recorded on the PSU lid label
using a permanent marker pen. They can also be saved electronically.
3. To save the amplifier settings electronically, enter the amplifier ID number into the Amplifier name field as shown
below. Use the same name as for the upstream activation.
4. Next click on the Tools tab and then click on Save current state to file. File name will be the amplifier name as in
the screen shot and the date at time of saving.
To Next Page
Loading...
