Technica Engineering 100/1000BASE-T1 MEDIACONVERTER MATEnet - General Information; Links; General Operating and Safety Strategy of Technica Engineerings Products

100/1000BASE-T1 MediaConverter MATEnetUser Manual
5
1.1.2 General Information
Voltage requirement:
6 to 30 Volt DC (nominal 12/24 Volt DC)
Power consumption: 2 Watt
Size WxLxH:
89 x 72 x 28 mm
Weight:
0,22 kg
International Protection:
IP 2 0
Operating temperature:
-40° to +80 °Celsius
Latency: (± 0.1 µs) tolerance
Direction
Mode
Latency [µs]
BASE-T1 to Fast Ethernet 100Mbps
1.6
Fast Ethernet to BASE-T1 100Mbps
1.2
BASE-T1 to Ethernet 1Gbps and legacy/IEEE mode
2.5
Ethernet to BASE-T1 1Gbps and legacy/IEEE mode
2.7
Table 1-1: Latency tolerance
1.1.3 LINKS
The user can download the latest firmware and documentation for the 100/1000BASE-
T1 MediaConverter here:
https://technica-engineering.de/en/produkt/100-1000base-t1-mediaconverter-
matenet-connector/
1.1.4 General operating and safety strategy of Technica
Engineering’s Products
Technica Engineering’s products are designed for operation in automotive systems
and for supply voltages of nominal 12 V or 24 V. The applicable limit, values adhere to
the standard norms for 12 V or 24 V automotive onboard power systems
correspondingly and can be found in the mentioned norms.
Should Technica Engineering’s products be operated in voltage ranges beyond those
specified in the norms, which represents a breach of the conditions of operation, then
this will void the product warranty and Technica Engineering will assume no liability
whatsoever for the results and/or consequences thereof.