13
1 GETTING STARTED
DMS-CTC-20131021-0004 v1.0
1.2.4 Bottom panel
Product label (item A)
The label on the bottom of the Gateway contains information about your Gateway, like:
Device information
Wireless security settings
Battery compartment (item B, optional)
During a power failure the Gateway can automatically switch to the auxiliary emergency power via the rechargeable battery (if
installed). This is to guarantee that the following services are not interrupted during power failure:
The connected phones or dial function for a connected alarm system
The DECT phones
Basic voice features.
AB
For the network name, two values are available:
Network Name 1 (SSID) is the network name of the 5 GHz access point and is of the following format:
HOME-XXXX-5 (where X is an alphanumeric character).
Network Name 2 (SSID) is the network name for the 2.4 GHz access point and is of the following format:
HOME-XXXX-2.4 (where X is an alphanumeric character).
The other values are common for both access points.
Do not remove the battery, unless instructed by your service provider.
To Next Page
Loading...
