Technicolor TC8717C - Connect the Gateway to Your Service Providers Network

16
2
SETUP
DMS-CTC-20131021-0004 v1.0
2.1 Connect the Gateway to your service provider’s network
Introduction
This section helps you to connect the Gateway to your service provider’s network.
Connecting the cables
Proceed as follows:
1 Take one end of the coaxial cable and connect it to your cable splitter.
2 Connect the other end to the MoCA/Cable port of the Gateway.
SN: CPYYWWPPXXX
CM MAC: 00111100ABCD
MoCA/Cable