24
2
SETUP
DMS-CTC-20131021-0004 v1.0
3 Windows prompts you to enter the security key.
Type the Password which is printed on the Gateway's side or back panel label in the Security key and click OK.
How to connect your computer on Windows Vista
Proceed as follows:
1 Click Start and click Connect To.
2 A list of available wireless networks appears.
3 Double-click the Gateway access point.
4 Windows prompts you to enter the network security key.
Type the Password which is printed on the Gateway's side or back panel label in the Security key or passphrase box and click
Connect.
The Gateway is listed with the Network Name 1 and/or Network Name 2 which is printed on the Gateway's side
or back panel label. For more information, see “Product label (item A)” on page 13.
To Next Page
Loading...
