59
7 ADVANCED CONFIGURATION
DMS-CTC-20131021-0004 v1.0
In the End port box, type the last port number of the port range. If you only want to specify one port, use the same number
as in the Starting Port box.
7 In the Service IP address box, type the IP address of the computer to which you want to assign the service.
8 Click ADD.
9 Your service is now listed in the Port Forwarding table. All incoming requests for the selected service will now be directed to
the selected device. The Gateway also automatically configures its firewall to allow this service.
To Next Page
Loading...
