70
8
SUPPORT
DMS-CTC-20131021-0004 v1.0
Reset/restore the Gateway via the Reset button
Proceed as follows:
1 Make sure that the Gateway is turned on.
2 If you want to:
Reset the Gateway, use a pen or an unfolded paperclip to push the recessed Reset button on the back panel of the
Gateway for approximately 5 seconds and then release it.
Restore the factory default settings of the Gateway, use a pen or an unfolded paperclip to push the recessed Reset button
on the back panel of the Gateway for at least 15 seconds and then release it.
3 The Gateway restarts.
SN: CPYYWWPPXXX
CM MAC: 00111100ABCD
Reset
To Next Page
Loading...
