Home Network
Power Wall Plug Repeater 10
4. On your PC, search for available wireless networks.
The default SSID of your device is
“TCHREP2.4G958CD8” (2.4Ghz) or
“TCHREP5G958CD8” (5Ghz).
By default, the password is empty.
5. Once connected, open a web browser and type the default IP address of your
device http://192.168.0.50 on the URL address bar. The Login page appears.
NOTE:
• If you cannot connect to the web
configuration page, make sure your PC
belongs to the same network segment as
your device.
The easiest way to do this is to set the
Internet Protocol (TCP/IP) properties of
your PC to automatic. If not, configure it
accordingly.
See “Configure the Computer” on page 37
for more information.
To Next Page
Loading...