Technics RS-B465 Service Manual

RS-B465
Mi FRONT PANEL CONTROLS AND FUNCTIONS
Control section
@ Power “standby © /on” switch
(power/H standby (5 = on)
This switch switches ON and OFF the secondary circuit power
only. The unit is in the “standby” condition when this switch
is set to the standby (!) position. Regardless of the switch
setting, the primary circuit is always “live” as long as the
power cord is connected to an electrical outlet.
(2) Eject button (4 eject)
This button can be used to open the cassette holder.
(3) Cassette holder
4) Display section
timer counter memory r peak hold reset “
rec off -— play auto manual }
cue and review
5] Recording-level control (rec level)
This control can be used to regulate the recording level.
@ Recording-balance control (balance)
This control can be used to balance the left and right sound
levels during recording.
@ Microphone jacks (mic)
© Bias-adjustment control (bias adjust)
The frequency response for each tape type can be equalised
by using this control.
9) Operation section
© Headphones jack (phones)
MPxX filter; aes noise reduction —— 1
1 B—DolbyNR—C

Technics RS-B465 Specifications

General

Brand	Technics
Model	RS-B465
Category	Cassette Player
Language	English