Technics RS-TR474

| RS-TR47
Procedure
1-3-10-12
Transformer base
lassy —~,!
1. Release the 3 claws, and then remove the power supply 2. Release the 3 claws, and then remove the transformer base
P.C.B. 1 ass’y.
Ref.No. Removal of the cassette holder ass’y
13 (DECK 1, DECK 2)
Procedure
17-2-5-13
Cassette holder ass'y
1. Pull out the rivet in the direction of arrow @, while pressing 2. Push the drive lever in the direction of arrow@, and open
the claw in the direction of arrow ®. the cassette holder ass’y.
Rib of cassette holder
AY ¢ SUT.
ass'y y
5%
Y
_e@
Cassette
holder
ass'y
Cassette
holder
ass'y
WY
Ae
a
rive iever
Fig. 1
4.
Open
the
cassette
holder
ass’y
so
that
the
rib
of
the
3.
Operate
the
cassette
holder
ass’y
in
the
direction
of
cassette
holder
ass’y
is
located
to
the
position
as
shown
arrow
@,
and
then
remove
it
from
the
boss
of
drive
lever.
in
Fig.1, and
then
pull
out
it
in
the
direction
of
arrow®.