Technics SA-CH750

DAT (digital audio tape deck)
DAT (not included)
ANALOG INPUT
OUTPUT
Oo ©
(R) (L) (RR) (L)
Stereo connection cable
(not included)
(R) (tL) (R) (L)
DAT
PLAY (IN)
Sound processor
@ SETTING THE TIME OF DAY
1 24-68
3°5°/
These instructions explain how to set the time for 16:25 (4:25 p.m.)
on Wednesday.
Switch on the power.
1 Press CLOCK/TIMER to select ‘“‘CLOCK”’.
The display will show CLOCK.
The display will return to what was previously indicated if you
allow 7 or more seconds to elapse before you accomplish the
next operation.
2 Press SET.
The day indicator will start to flash.
SA-CH750
Video disc player
Video disc player (not included)
AUDIO VIDEO
OUTPUT OUTPUT
(R) (L)
Video connection cable
(not included)
Stereo connection cable
(not inlucded)
Sound processor
3 Press one of the SELECT buttons to select
“WED’’.
Flashing
Press SET.
Press one of the SELECT buttons io select
“4 6’’.
Going from 23:59 to 00:00 on the hour display willnot change
the day display.
ak
6 Press SET.
7 Press one of the SELECT buttons io select
95”
Going from 59 to 00 on the minute display will notchange the
hour display.
cio —<$_—
8 Press SET to finish setting the time.
After about 2 seconds, the display will return to vhat it were
before entering the clock setting mode.
To display the clock again, press CLOCK/TIMER. Thedissplay will
show “CLOCK”, and then clock will appear for 5 secons,
“E” appears on the display if the power cord has been oicee discon-
nected or there has been a power failure. If this happen, reset the
time.