Technics SA-EX500 User Manual

Right speaker Left speaker
(not included) (not included)
1. Before sound can be heard, both surround speakers must be
connected.
2. Do not connect the surround speakers to the front speaker ter¬
minals. The surround speakers may be damaged if connected
to the front terminals due to the output power difference
between the front and surround terminals.
You can amplify bass sounds by connecting a subwoofer to your
receiver.
When connected, the subwoofer can be placed in any position.
mmmm
This receiver has no amplifier section designed especially for the
subwoofer, so you cannot adjust the subwoofer volume level by the
receiver.
To connect a subwoofer which have a
This unit
To connect a subwoofer which does not
have a built-in amplifier
Connect an optional amplifier to the “SUBWOOFER” terminals of
this unit and then connect a subwoofer to the speaker terminals of
the amplifier.
When adjusting the volume of the subwoofer
After setting the volume control on the subwoofer or on the amplifier
which is connected to the subwoofer, make any further adjustments
with the volume control on this unit.
To connect a subwoofer with the
speaker cable
SA- EX7D0 only i
Speaker impedance : 8-16 n

Technics SA-EX500 Specifications

General

Brand	Technics
Model	SA-EX500
Category	Stereo Receiver
Language	English