Technics SA-EX500 User Manual

FM AUTO/MONO
Set to the frequency from
which you want to start auto¬
matic memory presetting.
(See page 14.)
Set to the desired broadcast.
(See page 14.)
If interference or static is keeping you from enjoying an
FM broadcast, press FM AUTO/MONO and change to
monaurual. You can preset the memory in monaurual
just as in stereo.
MEMORY
•MANUW.-AUTO
Press MEMORY until the fre¬
quency begins to change.
(Automatic memory presetting will start.)
During automatic memory presetting,
the memory indicator will flash while the
frequency scrolfs.
-1
/
af - “i
Flas' hes
To stop, press MEMORY once again.
When a broadcast station is preset
The memory indicator and the preset channel number will be dis¬
played for approximately 1 second.
To cancel the memory function, press
MEMORY again.
Holding the buttons down lets you scroll
through channels faster.
i —m
Lights up
When presetting is completed
The last broadcast station to be preset will be displayed.
M/9BB
Frequencies may not be preset correctly in cases where the broad¬
cast waves are too strong or too weak. In such cases, carry out
presetting manually.
“bk ™ Press MEMORY.
•MANUAL-Airro
\
r
i_
7 ' (
H / )
/ \ ^
The channel will blink on the display.
4
w-
QUARTZ LOCK STEREO
(
i~ n n
nn in \
i i i
On / /_/ MHl )
To continue presetting
Repeat steps 1 through 4.

Technics SA-EX500 Specifications

General

Brand	Technics
Model	SA-EX500
Category	Stereo Receiver
Language	English