Technics SA-GX505 User Manual

Listening to Radio Broadcasts connes
1 2
‘SPEAKERS
A
3 4°95 6
=
mon
ore
Memory scan indicator
Tape indicator [FM MODE] [MEMORY SCAN]
Memory tuner operation
Have you completed the steps (on pages 16—17)
of “Memory presettings” ?
1 Switch ON the power.
Select the “A” and/or “B” speaker system(s)
to be used.
Check to be sure the tape indicator is not il-
luminated.
If the tape indicator is illuminated, press this switch.
A. Press the “TUNER” button.
Select the desired “CHANNEL”.
To designate channels 1—9:
Press the appropriate (1—9) preset-tuning button.
To designate channels 10 —30:
@ Press the button for the most significant digit (1, 2 or 3).
@ Press the button for the least significant digit (1—0)
within 2 seconds after pressing the first button.
Note:
If the interval between pressing the first button and press-
ing the second button is more than about 2 seconds, the set-
ting may not be made correctly. If this happens, make the
setting once again.
Adjust
the
volume
level
and
the
tone
quality
as
desired.
(Refer
to
page
14.)
Channel selection using the ‘Memory scan
button
This feature is convenient for use when trying to locate a certain
broadcast, or to listen to each station briefly to hear what is being
broadcast.
MEMORY SCAN
Press the memory scan button.
(The memory scan indicator will illuminate.)
Each frequency will then be heard (in sequence) for about 3
seconds.
The preset channel number will be displayed in the channel
display.
Preset channel number
Quaarz
tock
ba.2
eieneo
ct
td
tr
(yer
on
EIT
MSCAN
Lien
€
Lt
we
Hi When a broadcast you want to listen to is
found
MEMORY SCAN
Press the memory scan button
(The memory scan indicator will switch OFF.)
The broadcast will continue, even after 3 seconds
have passed.
Station
Memory
File
(Use
this
file
to
record
your
memory
selections.)
ae ae
[CH. 23 | cH. 24 | CH. 25 | CH. 26 | CH. 27 | CH. 28 | CH. 29 | CH. 30

Technics SA-GX505 Specifications

General

Brand	Technics
Model	SA-GX505
Category	Stereo Receiver
Language	English