Technics SA-GX505

Concerning
Sound
Mode
Operation
There are two modes available for this unit.
Select the one of your choice.
Dolby Pro-Logic Surround mode
Positioning the speakers. __
The Dolby Pro-Logic Surround System recreates, in your home, The illustration is an example when enjoying Dolby Pro-Logic
the powerful and dynamic sound space of a movie theater, when Surround.
used with Dolby Pro-Logic encoded source materials. When enjoying Dolby 3 stereo sound, the rear speakers are not
necessary.
To enjoy the Dolby Pro-Logic Surround system, you must connect
speakers to the “REAR” speaker terminals on the rear panel of _
the main unit, and, for maximum benefit from this system, the Front speaker (Left) Front speaker (Right)
installation of a “CENTER” speaker is also recommended. (Refer
to
page
7
for
instructions.)
ia
a
fay
oe
Manufactured
under
license
from
Dolby
Laboratories
Licens-
oe)
ing Corporation. c (2) Sy
“Dolby”
and
the
double-D
symbol
are
trademarks
of
Dolby
<,
,
Center
speaker
SS
Laboratories
Licensing
Corporation.
_~,
<<
gs
=
phy
Rear
speaker
S
“iy
Rear
speaker
(Lett)
(Right)
Dolby
3
stereo
mode.
When playing back with this mode, the front signals become
clear and sharp, without any “sound hole” effects that 2-channel
reproduction may cause. If the speakers are placed on both sides
of the TV, regardless of the distance between the speakers or a
place in which you watch and listen, the optimum stereo effects
and channel separation will be realized.
— 26—