Technics SC-DV170 User Manual

39
Recording operations
RQT5471
3
H REC
PAUSE
ÎNR2 REC
2
A
23 ∫
21
1
2
@
DECK 1/2
TAPE EDIT
1
2
2 REC1
B
[A] Recording the radio
Preparation: Do the preparatory steps (á page 37).
1 Tune to the required station.
(á page 24 or 25)
2 Press [´ REC PAUSE].
The deck goes into the recording standby mode and the play
indicator “"” or “!” starts flashing.
3 Press ["] (reverse side) or [!] (forward side) to
start recording.
To stop recording
Press [º].
To pause recording
Press [´ REC PAUSE].
The deck goes into recording standby mode.
To resume recording press the flashing ["] or [!].
»
B
Tape-to-tape recording
Preparation: Do the preparatory steps 1 and 3 (á page 37).
1 Set the tape direction on both decks.
1 Press [DECK 1/2] to select “DECK 2”.
2 First press ["] or [!], and then [º].
Repeat steps 1 and 2 for deck 1.
2 Press [TAPE EDIT] to start recording.
The indicator “"” or “!” shows deck 2 direction.
If either deck stops, the other deck also stops.
To stop recording
Press [º].
Both decks will stop.
To enjoy another source while recording
Start playing the other sound source.
You can change the volume level and tone quality without affecting
the recording.
Note
The recording level and the noise reduction effect of the original
(play) tape will be recorded on the new tape.

Technics SC-DV170 Specifications

General

Brand	Technics
Model	SC-DV170
Category	Home Cinema speakers
Language	English