Technics SC-DV170

Convenient functions
RQT5471
52
B
1
2
3
4
A
1
1
INPUT SELECTOR
1
INPUT SELECTOR
4 2 3
@
DOLBY NR
H REC
PAUSE
REV MODE
Using other equipment
»
A
Listening to an external source
1 Press [INPUT SELECTOR] to select
the external source.
Each time you press the button:
TUNER>DVD>TAPE>VCR (EXT)>VDP (AUX)
^----------------------------------------------------------------------------}
On the remote control
Press [VCR (EXT)/VDP (AUX)].
2 Operate the unit.
See the unit’s manual for details on connection and operation.
»
B
Recording an external source
1 Press [INPUT SELECTOR] to select
the external source.
2 Select Dolby NR and reverse mode.
(á page 37)
3 Press [´ REC PAUSE].
4 Press ["] or [!] to start recording.
5 Start the source to be recorded.
See the unit’s manual for details on connection and operation.
To stop recording
Press [º] on the deck.
To pause recording
Press [´ REC PAUSE].
The deck goes into recording standby mode.
To resume recording press the flashing ["] or [!].
Recording onto an external unit
1 Press [INPUT SELECTOR] to select the source to be recorded.
2 Start recording on the external unit and start playing the source to
be recorded.