Technics SC-HD81 User Manual

®Once stations have been preset, you can easily select them from the
tuner or the remote control.
ST-HD51 sold outside P ‘ %
United Kingdom ' ¢ You can preset a total of 39 stations between the FM and AM bands.
STHDSIE ®Stations can be set automatically or manually.
Automatic memory presetting
The frequencies are automatically preset (in sequence from lower to
higher frequencies) into the memory: “channels” 1 to 39 are available
for the presetting of FM stations and “channels” 21 to 39 are available
for AM stations.
This example in the figure shows how to preset FM stations.
| Switch on the power.
2.
Press FM/AM to select the desired band.
Each time you press FM/AM, “FM” and “AM” will appear
alternately.
ST-HD51 for United Kingdom
Press FM or AM to select the desired band.
ST-HD51
sold
outside
k}
Press
TUNING
MODE
to
select
“MANUAL”.
United
Kingdom
Each
time
you
press
this
button,
“MANUAL”
and
“PRESET”
will
appear
alternately.
ms Se eee 4 Press and hold ~ or « until the display shows
s“" 2 ot
FH Oy, SOMHs” the frequency from which you want to begin
—— TUNEA — a automatic memory presetting.
Press v or 4 momentarily to stop changing frequencies when
the displayed frequency approaches the desired frequency. Tap
v or «a few times until the desired frequency is reached.
[J Hold down SET.
Release your finger when the words “AUTO MEMORY” scroll
across the display.
The “M” in the display will then flash while the tuner is storing the
received frequency in memory. When storing is complete, “SET OK”
will be displayed.
To confirm the preset stations: E]
1. Press TUNING MODE to select “PRESET”.
2. Press v or a.
“QUARTZ LOCK”: Lit when a station is picked up clearly
“STEREO”: Lit when an FM stereo station is picked up
When “ERROR” appears:
Automatic memory presetting does not work when radio waves from
the broadcasting station are too strong or too weak.
In such case, carry out presetting manually. (See page 12.)
When you preset a broadcast station to a channel that has already
been preset, the previous presetting will be erased. So if, for example,
FM frequencies are preset from channel 1 to 39 and then AM frequen-
cies are preset, the first AM frequency will be preset to channel 2
(thus erasing the FM presetting to channel 21), the seconds AM
frequency will be preset to 22 (erasing FM 22), and so on.
Preset channel
ee
yer 3
i —>
Before use

Technics SC-HD81 Specifications

General

Brand	Technics
Model	SC-HD81
Category	Speakers
Language	English