Technics SC-HD81 User Manual

I)
i=] J
°o
aA4Q c— Ty,
— — rly fll
| =a S mm
AOPEHICLOSE f A ' AOPEN/SLCSE
- @
g operations
Recordire
AY EDIT
mk a a
Recording from compact discs {For SC-HD51|
_ One-touch editing -
The tape deck automatically reads the length of the loaded tape, and
ihen caiculates which iracks go on which side of the tape so that no
track is cut in the middle at the end of either side.
Recording will begin from the first track of the dise. It will continue
through to the last track of the disc and then stop automatically.
Notes
@ Use a tape of under 99 minutes.
¢You cannot edit-record tracks numbering higher than 24.
One-touch editing automatically positions the leader tape for you. so
you don’t have to do it manually.
Press 4 OPEN/CLOSE once again to close the holder.
To record in Dolby B NR:
Press DOLBY NR and check “OQ” is displayed.
3 Press REV MODE to select the reverse mode.
=: Oneside will record, and then the tape will stop automat-
ically at the tape end.
>: Both sides will record (forward side— reverse side), and
then the tape will stop automatically at the tape end.
cum): Same as above (When you press AI EDIT, “cl=>” will be
automatically switched over to “72=D".).
Insert a CD in the tray.
(For details, see page 16.)
Press Al EDIT.
The deck will rewind the tape and recording will start. In the
meantime, “AI EDIT TAPE” will scroll across the display from
tight to left. However, it will take a moment for recording to
actually begin.
ES
To stop one-touch editing:
Press ll on the cassette deck.
The CD player will also stop.
“EDIT OUT” will scroll across the display from right to left.
When tracks are allotted to side B:
After recording the allotted tracks on side A, the cassette deck will
continue recording on side A and will make a blank portion on side
A in order to measure the proper length of the tape.
To edit-record programmed tracks
@ Perform steps 1—~L above, and then press CD and PROGRAM on
the remote control.
@) Select the track number from the remote control with the numeric
buttons.
) Repeat step @) until you have prograr
24 tracks).
(4) Press AI EDIT. Recording will begin.
med all tracks (max.
After edit-recording has finished:
The tape deck automatically puts recording on standby. In the mean-
time, if “LINK” flashes on the display, there is enough space on the
tape that you can continue recording from another CD (see page 31).
Tf you want to link the tracks, do not press if on the CD player.

Technics SC-HD81 Specifications

General

Brand	Technics
Model	SC-HD81
Category	Speakers
Language	English