TURNTABLE SECTION
Type: Quartz direct drive / Manual
turntable
Drive method: Direct drive
Motor: Brushless DC motor
Turntable platter: Aluminum diecast / Diameter
33.2cm (13-5/64”) / Mass 1.7kg
(3.74lb.)
Turntable speeds: 33-1/3 r/min, 45 r/min
Variable range pitch: ±8%, ±16% (two settings)
Starting torque: 1.5kg-cm (1.3lb-in)
Build-up characteristics: 0.7s. from standstill to 33-1/3 r/
min
Braking system: Electronic brake
Wow and flutter: 0.01% WRMS* / 0.025% WRMS
(JIS C5521) / ±0.035% peak(IEC
98A Weighted)
Rumble: -56dB (IEC 98A Unweighted) / -
78dB (IEC 98A Weighted)
*This rating refers to turntable assembly alone, excluding effects
of record, cartridge or tonearm, but including platter. Measured
by obtaining signal from built-in frequency generator of motor
assembly.
2
To Next Page
Loading...
