Technics SL-1200M7L Owner's Manual

10
English
(10)
Putting the player together
(continued)
In order to prevent damage during shipping, some of the equipment has been disassembled.
Put the player together in the following order.

Before setting up, put on the stylus guard to protect the stylus tip, return the tone arm to the
arm rest and fix it with the arm clamp.

Do not connect the AC power supply cord until set up is complete.

When fitting the turntable, prevent foreign material from getting in between the main unit and
turntable.

Do not touch or scratch the board.

Front side
(Printed side):
Record mounting face

Back side: Slip face
Turntable
Board
Center spindle
Balance weight
Slip sheet
Slipmat
Head shell
(

09)
Attention
Handle carefully as
this is heavy.
SL-1200M7LP.indb10SL-1200M7LP.indb10 2022/02/1612:14:392022/02/1612:14:39

Technics SL-1200M7L Specifications

General

Drive Method	Direct Drive
Type	Manual Turntable
Wow and Flutter	0.025% WRMS
Tonearm Type	Universal Static Balance
Tonearm Effective Length	230 mm
Tonearm Overhang	15 mm
Power Consumption	8 W
Motor	Brushless DC motor
Turntable Speeds	33 1/3, 45 rpm
Platter	Aluminum die-cast, 332 mm diameter
Cartridge Weight Range	5.6 - 12.0 g 14.3 - 20.7 g (including headshell)
Terminals	Ground Terminal x 1
Dimensions	453 x 353 x 169 mm
Weight	9.6 kg
Starting Time	0.7 sec (33-1/3 rpm)
Signal-to-Noise Ratio	78 dB (DIN-B)
Tracking Force Range	0-4 g
Power Supply	AC 120 V, 60 Hz