Technics SL-1210G User Manual

English
(22)
Pitch control
(fine adjustment to pitch)
22


To measure pitch
The four rows of strobe mirrors around
the edge of the turntable can assist you in
measuring pitch.
The strobe mirrors are lit by the strobo light
(blue LED) synchronizing with the precise
frequency of digital control.
Always use the blue LED to measure the pitch.
・
・
・
+6.4
3.3
0
-
3.3
%
Strobo light
Attention
+6.4 % change in pitch when stationary
+3.3 % change in pitch when stationary
Normal turntable speed (33-1/3, 45 or
78 r/min) when stationary
-3.3 % change in pitch when stationary
Strobe
mirrors
1
Press [RESET] to turn off the blue
LED light.
2
Press the pitch range select
button to select the pitch range.
z
[×2] light on: ±16 %
z
[×2] light off: ±8 %
3
While the turntable is revolving
Slide [PITCH ADJ].
z
Pitch can be adjusted between approx.
–8 % and +8 % or approx. –16 % and
+16 % according to your selection.
z
The numbers represent approximate
percentages for your adjustment.
PITCH ADJ
RESET
×
2
Pitch ADJ control
Pitch range select
button
Blue LED indicator
RESET button


To reset pitch to the preset value
Press [RESET].
The blue LED indicator lights and the pitch
immediately returns to a preset value regardless
of the [PITCH ADJ] position.
(33-
1
/
3
, 45 or 78 rpm)
+6.4 % change in pitch when stationary
+3.3 % change in pitch when stationary
Normal turntable speed
(33-
1
/
3
, 45 or 78 r/min) when stationary
-3.3 % change in pitch when stationary
SL-1200G_1210G PP北米_Black model add（GAEから再展開）_20210706-.indb 22SL-1200G_1210G PP北米_Black model add（GAEから再展開）_20210706-.indb 22 2021/07/15 9:17:362021/07/15 9:17:36

Technics SL-1210G Specifications

General

Brand	Technics
Model	SL-1210G
Category	Turntable
Language	English