Technics SL-MC7 - Program Playback; Creating and Managing Programs

Operations
■
■
1
' ~~~ II
1 pppi
□ ^ c
—
••
PROGRAM
1
BSC
u
___ -J
[o'
DISC ENTER
|0 YZ||t10 SPACtl
' -
-,
PROGRAM
N 1 ✓
■ w sc;
^ 1 ^
._ _^
PROGRAM
•
“"‘k • /
—D8C
/' ( \
^ .
■
PROGRAM
asc- l TR^K
1
1
fto.
•_ _ _
PKXmi
J (rJ!!)
J £)ISC\(__ ^TRAC«
--
PflOGJMM
-/
DISC t— LJ TTWCK
n ’ p ' ■ /
! i . i S t
_
iCi SEC
__
L Pro gram play^ __j
Program play lets you playback your favorite tracks in the sequence
you want to hear them. The program can hold up to 32 items.
Perform steps 2 to 4 within 7 seconds of each other.
[in the stop mode]
D Press [PROGRAM].
B Press [DISC/CAPS].
B Press the numeric button(s) to select the
disc(s).
B Press [DISC ENTER].
The “AL" indication shows that all the tracks on the disc are
selected.
To program disc numbers only, repeat steps 2-4.
Slot No. 0 can also be programmed.
Press the numeric button(s) to select the
track.
Repeat this step if you want to enter tracks from the same
disc.
Repeat steps 2-5 until you have completed all
entries.
nron
• PGM FULL is displayed if you try to enter a 33rd item.
• Empty slots and track numbers that don’t exist on the discs can be
programmed but clear when play starts.
0 Press [ ► ] .
The changer plays the tracks in the programmed order and
then stops automatically.
To enter additional selections during play, repeat steps 2-5.
Direct programming
□
(Only available from the remote control.)
This function allows you to add a track to your program while listen¬
ing to it.
[While the track you want to program is playing]
Press [DIRECT PROGRAM].
When you make a program as explained under “Program play"
above, and then perform this procedure without clearing the pro¬
gram first, the selected track is added to the end of the program.
To listen to programmed tracks, press [PROGRAM] and check
“PROGRAM” appears on the display, then press [ ► ].
rwH
• If you press [DIRECT PROGRAM] and there are already 32 items
in the program, “PGM FULL” is displayed and the track cannot be
added.
• During program play, [DIRECT PROGRAM] does not respond to
touch.
ROT4941