Technics SL-MC7 - Direct Playback; Selecting Discs and Tracks

Direct pla y B
You can start play from the disc and track of your choice.
Perform steps 1 to 3 within 7 seconds of each other.
Press [DISC/CAPS].
Press the numeric button(s) to select the
disc.
step 3 on page 8)
Press [DISC ENTER].
Press the numeric button(s) to select the
track.
Play starts at the selected track and continues through to the
end of that CD.
To select a track numbered higher than 10:
For example: “11"
[Eo]-*[u-cn
[ Single disc play El
Single disc play is a convenient way of playingback a specific disc,
one you just bought, for example, without having to go through the
usual selection procedure.
Set a disc in slot No. 0.
Press [SINGLE ► ] .
The changer plays all the tracks on the disc in slot 0 and then
stops automatically.
Single disc play is canceled if you skip discs.
ROT4941
Operations