Technics SL-MC7 User Manual

Operations
L Sequen tial play ___ \
The changer plays all the tracks on all the discs in order and stops
automatically when the last track on the last disc finishes playing.
Before starting, load your discs.
Perform steps 2 to 4 within 7 seconds of each other.
D Press [POWER].
The unit will switch on.
First, the message “CHECKING DISCS" will be displayed and
then the number of the disc previously played. If it was a CD-
TEXT disc then the name of the album will also be displayed
page 17).
Steps 2 and 3 are not necessary if you want to begin play
from this disc.
B Press [DISC/CAPS].
Press the numeric button(s) to select the
disc.
To select a disc numbered over 10:
For example: “11”
For your reference
You can also select a disc with [DISC SKIP) (- or +) instead
of doing steps 2 and 3.
Press [DISC ENTER].
B Press [ ► ] .
The changer plays all the loaded discs, from the selected
disc, all the way through to the disc before it.
Text information will be displayed in place of the time if it is a
CD-TEXTdisc K page 17).
To stop play
Press [ ■ ] .
The display showing the number of tracks and the total playing time
is cleared if the front panel is opened.
To temporarily stop play
Press [II].
To search for a position
Press and hold either ( ◄◄ ] (backward) or [ ►► ] (fonward) during
play. In program or random play modes, searching can only be
done on the current track.
To skip tracks
Press either [ ] (backward) or [ ) (forward) during play. In
program play, skipping goes in the programmed order.
You cannot skip backwards in random mode.
To skip discs
Press either [-] (backward) or [+] (fonvard) either while a disc is
playing or stopped.
rnn
This does not work during full disc random play mode or program
play.

Technics SL-MC7 Specifications

General

Brand	Technics
Model	SL-MC7
Category	CD Player
Language	English