12
Connections (Continued)
Basic
Analogue audio output device
connection
PHONO cable
(not supplied)
Turntable
PHONO earth lead
(not supplied)
Analogue audio cable
(not supplied)
Analogue audio output device
• When connecting a turntable with a built-
in PHONO equalizer, turn the equalizer of
turntable off or connect the PHONO cable to
the analogue audio input terminals (LINE1/
LINE2) of this unit.
• When connecting a turntable with a PHONO
earth lead, connect the PHONO earth lead to
the PHONO EARTH terminal of this unit.
Pure Amplification
By disabling the network functions, HDMI, etc.
this unit provides the higher quality sound.
• The features such as network, HDMI, etc. are
disabled when “Pure Amplification” is set to
“On”.
Press [SETUP].
Press [ ], [ ] repeatedly to select “Pure
Amplification” and then press [OK].
Press [ ], [ ] to select an item and then
press [OK].
On:
All the features using network function and
HDMI are disabled.
On (Custom):
To disable the network function only, set
“Network/USB-A/Bluetooth” to “Disabled”.
Set “HDMI” to “Disabled” to disable the HDMI
function (HDMI ARC) only.
Note
• While this unit is in “Pure Amplification”
mode and the network functions, HDMI, etc.
are disabled, playback of the online music
streaming services, music files from network
devices, etc. will not be available. Also, this unit
is not displayed as the output speaker on the
application such as “Technics Audio Center”.
• The display is turned off by dimmer function
while this unit is in “Pure Amplification” mode.
Press [DIMMER] repeatedly to switch the
brightness. ( 10)
To Next Page
Loading...
Need help?
General
