Technics SU-V660 User Manual

Using
the
short-circuit
pins
(Included)
J
Shorting
pins are
inserted
into
the
“‘PHONO"’
terminais
to
reduce
noise
|
a
ES the pins before connecting a turntabie and reinsert the pins if the eon saa) j
} turntabie is later disconnected. Never connect a shorting pin to a “REC pres |
OUT" terminal of any terminal other than those above.
System configurations
Turntable (not included) Tape deck 1 {not inciuded)
Digital audio tape deck (DAT)
Tuner {not included) not included) | nt
10):
=?
j=
H
2|fesel
r
:
i
[eee
<
was.
ameeemememmnmmcemmn
|
7
i
=
os
:
Compact
disc
player
Video
disc
player
-
“a
(nat included) | (not included) i
Main (A) speaker systems Second (8) speaker systems
(not Included) inct included)
To connect to each terminals
Fe Ceca Eee bekce eee ett ha he ak en ae
H z -
Make connections to each component in the system by using stereo connection cabtes (not included).
erin st meester
Connect a component such as a video disc player (audio only con-
nectabte), etc.
Video disc player (rot included}

Technics SU-V660 Specifications

General

Type	Integrated Amplifier
Total Harmonic Distortion	0.007%
Damping Factor	60
Input Sensitivity	2.5mV (MM), 150mV (line)
Channel Separation	55 dB (line)
Speaker Load Impedance	4Ω to 16Ω
Signal to Noise Ratio	106dB (line)
Dimensions	430 x 150 x 360mm (W x H x D)