Technics SU-V660 User Manual

LISTENING TO TNE SOUNT connes
nee
as
While listening to music .
Select the cartridge-type when Iistening to
phono discs.
MM { =-~ #):Set to this position when using a movingmagnet
type cartridge or hiqh-autput movingcoil cartridae
(i mV or more).
MC(s— «): Set to this position when using a moving-coil type
cartridge.
‘mode
Select the stereo or monaural operation.
stereo( .— a):Set to this position to listan in stereo.
mono{ £— «}:Set to this position to listen monaurally.
The left and right sounds will be mixed, and the
same sounds will be heard from both speakers.
lloudness:
When listening to music at a low volume level,
press inward the loudness switch to the “on”
position for compensation of the bass range.
tone controt
Press the tone control switch to the “on” pos!-
tion if you want to adjust the bass or treble
tone quality.
If set to the “‘defeat" position, tone controls have no effect, and
fraciranoir raenAnesa Khannamac flat
Te rnquemiiay weopwe te ee
Adjust the balance for the left/right volume.
itreble;
Adjust the high-frequency sound to the desired
tone quality.
bass]
Adine? tha
“ag wwe ssaw - == gu ci yy
tone quality.
"balance.
|
ficadeese
|
guia
phaae
selector
‘tone control
While listening dalgolerelsmsl-t-lefsistelar
Speaker selectors
Headphones (not included)
e Reduce the volume level befare connecting headphones.
*!f the sound from the speakers is not wanted, set the speaker
selectors to the “off” position.
¢ Avoid listening for a long time at a volume level so high that #
irritates the ears.

Technics SU-V660 Specifications

General

Type	Integrated Amplifier
Total Harmonic Distortion	0.007%
Damping Factor	60
Input Sensitivity	2.5mV (MM), 150mV (line)
Channel Separation	55 dB (line)
Speaker Load Impedance	4Ω to 16Ω
Signal to Noise Ratio	106dB (line)
Dimensions	430 x 150 x 360mm (W x H x D)