User Guide
11
FITTING THE STAND
Before using the TV for the fi rst time, you
should fi t the stand to the TV.
NOTE: You do not have to fi t the stand if you
are mounting the TV on a wall. See
Wall Mounting on page 13.
1. Place the TV face down on the edge of a
fl at surface, for example a table, taking care
not to damage the TV screen.
2. Fit the stand to the stand column (part
of the TV), ensuring the locating hole is
correctly aligned as shown on the right.
3. Rotate the stand anti-clockwise to lock in
position.
4. Fit the two fi xing screws (supplied) into the
two holes at the base of the stand.
NOTE: Do not overtighten the fi xing screws
as this may damage the stand.
Tesco-Tecknika IDTV with DVD Player UK .indd Sec1:11Tesco-Tecknika IDTV with DVD Player UK .indd Sec1:11 07/07/2009 16:41:4507/07/2009 16:41:45
To Next Page
Loading...
Need help?
General
