Technika 15.4-311 - Channel Tuning and Management

User Guide
15
Volume
1. Press the Vol +/Vol - buttons to increase/decrease the volume. The volume level will be displayed
at the bottom of the screen.
Mute
1. Press the MUTE button to mute the sound. The Mute symbol will be displayed at the bottom left
hand side of the screen.
2. Press the MUTE button again or the Vol +/Vol - buttons to restore the sound. The Mute symbol
will disappear.
Mono/Stereo (TV Analogue mode only)
Press the NICAM button to switch between mono (
) and stereo ( ) sound.
Select the TV channel
1. Press the Numeric button(s) to select the channel you require.
NOTE: In TV Analogue mode, use the -/-- button to select channel numbers above nine. Press the
-/-- button twice to enter two digit channel numbers and three times to enter three digit
numbers.
2. Press the CH +/- buttons to scroll up or down through the channels.
Picture Mode
Press the PMODE button on the remote control for the display options. Choose from the following
settings displayed at the bottom left hand side of the screen:
• STANDARD
• PERSONAL
• MOVIE
• SPORT
• MILD
• GAME
Picture Format
Press the PICTURE FORMAT button to choose from one of the following aspect ratios. The aspect
ratio setting is displayed at the bottom left hand side of the screen:
• Fullscreen
• Zoom (Analogue only)
• Stretch
• Auto
• 4:3 (Analogue only)
• 14:9 (Analogue only)
• 16:9 (Analogue only)
• Subtitle (Analogue only)
Tesco-Tecknika IDTV with DVD Player UK .indd Sec1:15Tesco-Tecknika IDTV with DVD Player UK .indd Sec1:15 07/07/2009 16:41:4807/07/2009 16:41:48