Technika Freeview STBHDIS2010 User Manual

22
Operating the box
Ethernet
"Ethernet" allows you to set IP address
manually or automatically.
When AUTO is selected and no Ethernet
cable is connected, the icon is highlighted in
red. The values of the ethernet settings will
be 0 as shown in the snapshot above.
When AUTO is selected and an Ethernet
cable is connected, the icon is highlighted in
green. The values of the ethernet settings will
be congured automatically as shown in the
gure above.
When MANUAL is selected and an Ethernet
cable is connected, the icon is highlighted
in green. The default values of the ethernet
settings will be 0 as shown in the snapshot
above and you need to enter the values for
each eld.
the ‘Version’ label under the ‘Install’ section
in Menu.
2. The version number is displayed beneath
the ‘Version’ label.

Technika Freeview STBHDIS2010 Specifications

General

Brand	Technika
Model	Freeview STBHDIS2010
Category	Set-top boxes
Language	English