3
Quick start guide
Receiving Channel Zero
Press the button to put the box into
standby, Channel Zero interactive services
will now be downloaded to your box. See
Channel Zero on page 27.
2. Press the OK button to enter the tuning
menu.
3. Once the automatic search has been
completed, all channels are stored and the
rst available channel is shown.
Services will be fully loaded when the red
light on the front of the box changes to
amber. This should take a few hours.
Tuning your box
The rst time you switch your box on, it will
automatically tune all available Freeview TV
and radio channels.
1. Press the
button to turn the box on. A
welcome menu appears after a short time
To Next Page
Loading...
Need help?
General
